Mac8 – Pin Terminal

Category:

Description

Test point

  • Terminal for check (CT series)
  • Long check terminal (CT-8 series)
  • Test point for surface mounting (3.2×1.6 type) (HK-1 series)
  • Test point for automatic inserting machine for SMT (3.2 × 1.6 type)(HK-2 series)
  • Test point for automatic inserting machine for SMT (2×1.25 type)   (HK-3 series)
  • Test point for automatic inserting machine for SMT (1.2×1.0 type)  (HK-4 series)
  • Color test point for automatic inserting machine for SMT (HK-5 series)
  • Test point for automatic inserting machine for SMT, for electric wire installation (1.0×0.5 type) (HK-6 series)
  • Test point for automatic inserting machine for SMT (HK-7 series)
  • Check terminal for oscilloscope (LC-1-G, LC-1-S)
  • Check terminal for oscilloscope (LC-2-G, LC-2-S)
  • Check terminal for oscilloscope (LC-22-G, LC-22-S)
  • Check terminal for oscilloscope (LC-3-G, LC-3-S)
  • Check terminal for oscilloscope (LC-33-G, LC-33-S)
  • Check terminal for f0.3 (LC-4-G, LC-4-S)
  • For design mistake check (OK series)
  • Terminal for both-surface check (RX-1-1)
  • Check terminal for logic (SA series)
  • Check terminal for logic (SB series)
  • Check terminal for logic (SE series)
  • For check (SM series)
  • Check terminal for logic (ST series)
  • Terminal for power supply voltage check (TC-1-1)
  • Terminal for wiring (WT series)
  • Conthrough series for check (XC-1)
  • Conthrough series for check (XC-2, XC-3)
  • Conthrough series for two-tiered installation and for check (XE series)

Wrapping terminal

  • Wrapping terminal (WA series)
  • Wrapping terminal (WB series)
  • Wrapping terminal (WH series)
  • Wrapping terminal (WK series)
  • Wrapping terminal (WR series)
  • Wrapping terminal (WV series)

Terminal(2-tiered type)

  • For insertion / removal of two-tiered type CX series
  • For two-tiered installation (fixed type) DC series
  • For two-tiered installation (fixed type) DG series
  • For two-tiered installation of PC boards (Fixed type) DP series
  • For two-tiered installation of super-small boards (DS series)
  • Power supply terminal for two-tiered installation (DX series)
  • For insertion / removal of two-tiered type (OX series)
  • For insertion / removal of two-tiered type (SX series)
  • Conthrough series for two-tiered installation and for check (XE series)

Terminal(Angle type)

  • Angle type (separate type) (LB series)
  • Terminal for fitting display board (LD-1)
  • Wrapping terminal (WA series)

For hybrid IC

  • Terminal for hybrid IC (BK series
  • Terminal for hybrid IC (CA series
  • Terminal for hybrid IC (Pitch: 1.27 mm) (CB series)
  • Terminal for hybrid IC (Pitch: 2.54 mm) (CB series)
  • Terminal for hybrid IC (CB-7 series)
  • Terminal for hybrid IC (CD series)
  • Terminal for hybrid IC (CDT series)
  • Terminal for hybrid IC (CF series)
  • Terminal for hybrid IC (CH series)
  • Terminal for hybrid IC (CK series)
  • Terminal for hybrid IC (CM series)
  • Terminal for hybrid IC (HC series)
  • Terminal for hybrid IC (HIC series)

adjustment part

  • Terminal for one-touch adjustment part (AK series)
  • For adjustment part (AM series)
  • Terminal for adjustment part (AT series)
  • Terminal for bidirectional adjustment part for surface mounting (ATS series)
  • Terminal for bidirectional adjustment part for surface mounting (ATSS series)
  • Terminal for bidirectional adjustment part (ATT series)
  • Adjustment part terminal for surface mounting (HM series)
  • Terminal for small adjustment part (KS, KB series)
  • LED extension pin (LF series)
  • LED extension pin (strong type) (LFF series)
  • Terminal for additional part (QB series)
  • Pin for leg extension (QE series)

SMD Terminal

  • Terminal for bidirectional adjustment part for surface mounting (ATS series)
  • Terminal for bidirectional adjustment part for surface mounting (ATSS series)
  • Terminal for mounting (CKW series)
  • Pin for surface mounting (DH, DHS series)
  • Conduction pin (angle free) for surface mounting (FAC-0.6)
  • Conduction pin (angle free) for surface mounting (FAL-0.6)
  • Fluorine terminal for surface mounting (FH series)
  • Test point for surface mounting (3.2×1.6 type) (HK-1 series)
  • Test point for automatic inserting machine for SMT (3.2 × 1.6 type) (HK-2 series)
  • Test point for automatic inserting machine for SMT (2×1.25 type) (HK-3 series)
  • Test point for automatic inserting machine for SMT (1.2×1.0 type) (HK-4 series)
  • Color test point for automatic inserting machine for SMT (HK-5 series)
  • Test point for automatic inserting machine for SMT, for electric wire installation (1.0×0.5 type) (HK-6 series)
  • Test point for automatic inserting machine for SMT (HK-7 series)
  • Adjustment part terminal for surface mounting (HM series)
  • Terminal for detachable adjustment part for surface mounting (HN-1 series)
  • Wrapping terminal for surface mounting (HW series)
  • Hybrid IC terminal for surface mounting (HZ series)
  • Additional check terminal for surface mounting (MT-1-1)
  • For lead part fitting (QH series)
  • Adjustment part terminal for surface mounting (SJ series)
  • Terminal for wiring (for surface mounting) (WTS series)

Pin(Parallel fitting type)

  • Terminal for hybrid IC (HC series)
  • Parallel type male pin for surface mounting (HHO-31)
  • Terminal for hybrid IC (HIC series)
  • Terminal for vertical fitting of a PC board (HTR-0.8)
  • Parallel fitting pin for surface mounting (KO-2-1)
  • Pin for inserting to a PC board in the horizontal direction (SDO series)

Terminal(Material : Fluorine)

  • Fluorine terminal for parts relay (FF series)
  • Fluorine terminal for surface mounting (FH series)
  • Fluorine terminal for fitting with screw (FN series)
  • Fluorine terminal (FT series)
  • Fluorine terminal for high withstand voltage (FT-5, 6 series)
  • Super-small fluorine terminal (FX series)

Terminal(for repair)

  • Terminal for additional part (for no-land hole) (AB series)
  • Terminal for repairing multilayer board (MR series)
  • Repair terminal for covering mistake in hole diameter (MS series)
  • Terminal for repairing of printed board (RT, PS series)

Terminal(others)

  • Terminal for aluminum board (AW series)
  • Terminal for fitting PC boards at right angle (BE series)
  • Terminal for fixing PC boards in parallel (BT series)
  • Pin of dissipating heat “Netsutorimushi? ” (CLB series)
  • Pin for reinforcing electric wire (CS series)
  • Terminal for film (FC series)
  • Terminal for flexible board (FR series)
  • Terminal for earth (GT series)
  • Male pin for HH-1 (HJ-1)
  • Male pin for HH-3 (HJ-3, HJ-31)
  • Grommet (HT series)
  • Pin for lead extension (LV series)
  • Terminal for fitting terminal block (MH series)
  • Male pin for HH-20 (OJ series)
  • Male pin for HH-5 (OP-50-2)
  • Male pin for super-small socket pin (PK series)
  • Up-and down conduction pin for high current (PO series)
  • Positioning pin (PST-4 series)
  • Lug terminal (RG series)
  • Side fitting pin (SK series)
  • Short bar (UB series)
  • Pin for fixing VM-2 series (VMS series)